Samsung ML-2251N - SMPS Unit Removal

5-9
Samsung Electronics
Disassembly and Reassembly
Service Manual
5.10 SMPS
1. Before you remove the SMPS, you should
remove:
- Front Cover
- Rear Cover
- Side Cover(LH, RH)
- Top Cover
2. Unplug one connector and remove three screws
then take the Inlet Bracket out.
3. Remove the two screws and remove the
Network Board.
4. Unplug one connector from the Main PBA.
5. Remove the six screws and take the Main
Board.
Inlet Bracket
Memory Board
Connector
Main PBA