Installing driver over the network
19
2. Using a network-connected machine
Command- line Definition Description
/s or
/S
Starts silent installation. Installs machine drivers
without prompting any
UIs or user intervention.
/p”<port name>”
or
/P”<port name>”
Specifies printer port.
Network Port
will be
created by
use of
Standard
TCP/IP Port
monitor. For
local port,
this port
must exist on
system
before being
specified by
command.
Printer port name can
be specified as IP
address, hostname, USB
local port name or
IEEE1284 port name.
For example:
• /p”xxx.xxx.xxx.xxx”
in where,
“xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /
P”LPT1:”, /
p”hostname”
• When installing the
driver silently in
Korean, type in-
Setup.exe /s /
L"0x0012” or
Setup.exe /s /L"18” .
/a”<dest_path>”
or
/A”<dest_path>”
Specifies destination
path for installation.
The
destination
path should
be a fully
qualified
path.
Since machine drivers
should be installed on
the OS specific location,
this command applies
to only application
software.
Command- line Definition Description
To Next Page
Loading...
