To Next PageTo Next Page
Need help?Do you have a question about the Samsung ML-4551ND and is the answer not in the manual?
General| Printer Type | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Resolution (Black) | 1200 x 1200 dpi |
| First Page Out Time (Black) | 8.5 seconds |
| First Print Out Time | 8.5 seconds |
| Memory (Maximum) | 512 MB |
| Duty Cycle (Monthly) | 150, 000 pages |
| USB Connectivity | USB 2.0 |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Print Speed (Mono) | 45 ppm |
| Connectivity | USB, Ethernet |
| Print Speed (Black) | 45 ppm |
| Network Connectivity | Ethernet 10/100 Base TX |
| Supported Media Types | Labels, Envelopes |
| Supported Media Sizes | Letter, Legal, Executive, Folio, Oficio, A4, A5, A6 |
| Duplex Printing | Automatic |
General safety guidelines for printer service engineers, including high voltages and lasers.
Safety warnings regarding toxic materials, electric shock, and fire hazards.
Guidelines for handling components sensitive to electrostatic discharge.
General introduction to the printer's features and models.
Detailed technical specifications of the printer.
Comparison of the printer's specifications against competitors.
Identification of the printer's physical components.
Overview of the printer's internal system architecture.
Hardware specifications of the printer's engine.
Guide for using the engine diagnostic control mode for testing.
Explanation of the paper's path through the printer.
Information on printing sample patterns for maintenance.
Troubleshooting guide for recurring image defects.
List and explanation of printer error messages.
Safety and handling precautions before disassembly.
Procedure for replacing the transfer roller.
Procedure for disassembling the Multi-Purpose Feeder (MPF) assembly.
Procedure for disassembling the holder pad assembly.
Procedure for disassembling the roller idle assembly.
Procedure for disassembling the Feed2 idle unit.
Procedure for removing the right side cover.
Procedure for removing the main Printed Board Assembly (PBA).
Procedure for removing the main drive assembly.
Procedure for removing the deve drive assembly.
Procedure for removing the connector PBA.
Procedure for removing solenoids.
Procedure for removing the rear cover.
Procedure for removing the left side cover.
Procedure for removing the top cover.
Procedure for removing the open cover.
Procedure for removing the inner cover.
Procedure for removing the fuser assembly.
Procedure for removing the duplex solenoid assembly.
Procedure for removing the exit roller.
Procedure for removing the Laser Scanner Unit (LSU).
Procedure for removing the DC fan.
Procedure for removing the toner sensor PBA.
Procedure for removing the registration assembly.
Procedure for removing the MP pick-up assembly.
Procedure for removing the pick-up and feed2 assembly.
Procedure for removing the engine shield.
Step-by-step guide to diagnose printer problems.
Troubleshooting common image quality issues.
Troubleshooting print position and paper jam issues.
Troubleshooting software and environment issues affecting printer operation.
Guide to toner cartridge care, life, and replacement.
Troubleshooting printer unresponsiveness due to environment setup.
Exploded view and parts list for the main printer assembly.
Exploded view and parts list for printer covers.
Exploded view and parts list for the printer frame.
Exploded view and parts list for the fuser unit.
Exploded view and parts list for the registration assembly.
Exploded view and parts list for the main motor.
Exploded view and parts list for the deve motor.
Exploded view and parts list for the exit solenoid.
Exploded view and parts list for the cassette assembly.
Exploded view and parts list for the duplex unit.
Exploded view and parts list for the SCF unit.
Overall system block diagram of the printer.
Detailed connection diagram of printer components.
List of recommended tools for troubleshooting.
List of acronyms and abbreviations used in the manual.
Guidelines for selecting an appropriate printer installation location.
Explanation of standard test patterns used for factory testing.
Information on the wired LAN option and LED status.
