GB
13
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press Program/Set.
Result
: The program number is displayed for a few seconds.
b Press Tuning and to assign a program number between 1
and 15.
c Press Program/Set to store the radio station.
Result:
The program number is no longer displayed and the station is
stored.
To store any other radio frequencies required, repeat Steps 3 to 6.
The PROGRAM function can be used to assign a new station to
an existing program number.
You can listen to a stored radio station as follows:
Switch the system on by pressing On/Standby ( ).
Select the TUNER function by pressing TUNER/Band on the front panel.
Select the required frequency band by pressing TUNER/Band.
Select the radio station as follows.
To listen to ... Press ...
A stored station a Press the Tuning Mode button
until “PRESET” is displayed.
b Tuning and to select the
required station.
Press Tuning Mode again to exit the stored station selection
function.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press
Mono/ST to switch from stereo mode to mono. The quality of the
sound will be improved.
Selecting a Stored Station
Improving Radio Reception
Searching for and Storing the Radio
Stations(continued)
To Next Page
Loading...
