EasyManua.ls Logo

Samsung MM-C8 - Timer and Sound Settings; Timer Function Setup; Canceling the Timer Function; EQ;S.BASS Functionality

Samsung MM-C8
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
B
20
GB
The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing ( ) .
Press TIMER/CLOCK until TIMER is displayed.
Press PROGRAM/SET.
Result:
ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing
or
button.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
or
button.
d Press PROGRAM/SET.
Result:
OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by pressing
or
button.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
or
button.
d Press PROGRAM/SET.
Result:
VOL 10 is displayed, where 10 corresponds to the
volume already set.
Press
or
button to adjust the volume level and press
PROGRAM/SET.
Result: The source to be selected is displayed.
Press
or
button to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a cassette tape.
TUNER (radio) a Press PROGRAM/SET.
b
Select a preset station by pressing
or
.
CD (compact disc) Load a compact disc.
Press PROGRAM/SET to confirm the timer.
Timer Function
7
5
6
1
2
3
4
Press ( ) to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
In standby,you can press MULTI JOG(PUSH ENTER) button
instead of PROGRAM/SET button and press
/
buttons or
turn MULTI JOG(PUSH ENTER) knob on the front panel
instead of
/
buttons on the remote control in step 4,5,6,7..
8
9
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press TIMER ON/OFF...
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Twice.
Result
: is displayed again.
Canceling the Timer
TAPE
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
REPEAT
TUNING
MODE
VOLUME
MUTE
+10
REV.MODE
DISPLAY
PTYRDS
TUNING/
ALBUM
CD/MP3-CD
SURROUND XT
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1,9
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
MUTE
O
DISPLAY
PTYRDS
SURROUND XT
Your micro component system is equipped with a preset
equalizer that allows you to choose the most appropriate
balance between treble and bass frequencies, according to the
type of music you are listening to.
Press EQ or MULTI JOG(PUSH ENTER) button until the required option is
selected.
Result
: Press the button repeatedly to select “EQ
PASS
POP
ROCK
CLASSIC
JAZZ
S.BASS
”.
S.BASS Function : S.Bass function emphasizes the bass sound to
produce the effect of explosion or booms.
EQ/S.BASS
Function
Treble Level Function
Treble Control function stresses high tones providing thudding
sound effects.
Press MULTI JOG(PUSH ENTER) button until TREB 00 is displayed.
Turn MULTI JOG(PUSH ENTER) knob to select from TREB -07 to
TREB 07, total 15 steps.
You can select the level of high tones you desire.
1
2
BASS function stresses low tones providing thudding sound
effects.
Press MULTI JOG(PUSH ENTER) button until BASS 00 is displayed.
Turn MULTI JOG(PUSH ENTER) knob to select from BASS -07 to
BASS 07, total 15 steps.
You can select the level of low tones you desire.
1
2
BASS Level Function
Selecting Sound Mode
Your compact system is equipped with the function of
Power Sound/Power Surround/Power Surround XT.
The Power Surround replaces conventional stereo sound
with a wider and more true-to-life sound. It creates the
feeling of being right at the centre of the music and being
surrounded by total music sound.
The function of Power Sound amplifies bass and improves
high key or bass twice as much for you to appreciate
powerful real sound.
Press SURROUND XT button until the required option is
selected. Each time the SURROUND XT button is pressed,
“P.SOUND,P.SURR ,P.SURR XT, OFF” is selected or can-
celled in this order.

Related product manuals