GB
15
B
14
You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press PROGRAM/SET button twice.
Result: The following indications are displayed:
(01 = Program no., – – = Track no. on the disc)
If you have already programmed 24 tracks, Check is displayed
instead of CH when you press PROGRAM/SET.
Press PROGRAM/SET one or more times until the track to be
changed is displayed.
Press or to select a different track.
Press PROGRAM/SET to confirm your change.
Press
MP3-CD/CD
(
√/»
)
to start listening to the selection.
Result:
The first track selected is played.
1
2
3
4
5
6
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen
may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD
Repeat function.
In the case of the MP3-CD, the PROGRAM/SET button
may be used as the RESUME ON, OFF function.
If the CD function is selected, stop the player by pressing button.
Load the selected CD.
Press PROGRAM/SET.
Result: The following indications are displayed:
(01 = Program no., -- -- = Track no. on the disc)
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
Press PROGRAM/SET to confirm your selection.
Result:
The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 5.
Press MP3-CD/CD (
√/»
) to listen to the track selection in the order pro-
grammed.
To... Press...
Listen to the current track again
once
Listen to the previous track
twice
Listen to the next track
once
Skip forwards or backwards
or the appropriate
one or more tracks number of times
To cancel the selection, press button.
Once if the compact disc player is stopped
Result:
PROG is no longer displayed.
If you open the compartment, the selection is cancelled.
8
9
7
Programming the Order of Playback
(This function is not available during playback of an MP3-CD.)
1
2
3
4
5
6
Checking or Changing Programmed
Tracks
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
TUNING
VOLUME
REV.MODE
DISPLAY
PTYRDS
TUNING/
ALBUM
CD/MP3-CD
SURROUND XT
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
REPEAT
TUNING
MODE
VOLUME
+10
REV.MODE
DISPLAY
PTYRDS
TUNING/
ALBUM
CD/MP3-CD
SURROUND XT
6
2,3,5
1
4
4
You can store up to:
15 FM stations
8 MW stations
7 LW stations
Switch the system on by pressing ( ).
Select the required frequency band by pressing TUNER/BAND
again on the front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
MW Medium Wave
LW Long Wave
To search for a Press TUNING MODE
station...
Manually One or more times until MANUAL
is displayed.
Automatically One or more times until AUTO is
displayed.
PRESET function is explained in detail in the section
“
Selecting a Stored Station
” on.
Select the station to be stored by:
Pressing or buttons
on the front panel or or
buttons
on the remote control
to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the or buttons.
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result:
The PROG is displayed for a few seconds.
b Pressing or buttons
on the front panel or or
buttons
on the remote control
to assign a program number .
c Press PROGRAM/SET to store the radio station.
Result:
PROG is no longer displayed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press MO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
You can listen to a stored radio station as follows:
Switch the system on by pressing ( ) .
Select the required frequency band by pressing TUNER/BAND on
the front panel.
Select the radio station as follows.
To listen to ... Press ...
Stored station 1. the TUNING MODE button until
“PRESET” is displayed.
2. or button to select the
required program.
Selecting a Stored Station
1
2
3
Improving Radio Reception
1
2
3
4
5
6
Searching for and Storing the Radio
Stations
TAPE
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
REPEAT
TUNING
MODE
VOLUME
+10
REV.MODE
DISPLAY
PTYRDS
TUNING/
ALBUM
CD/MP3-CD
SOUND MODE
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX
PROGRAM/SET COUNTER RESET
SLEEP
REC./PAUSE
MUTE
REV.MODE
DISPLAY
PTYRDS
CD/MP3-CD
SURROUND XT
To Next Page
Loading...
