Samsung MM-G25 - MICOM, MPEG Initialization & Update

Samsung Electronics 4-11
Troubleshooting
4-2 MICOM, MPEG Initialization & Update
 MICOM Initial
In STANDBY condition, press “STOP” button of Main Unit 5 seconds more, time display as ‘--:--’.
Then Initialization complete.
 MICOM Update
MICOM update is enabled via USB and CD/DVD.
1. Copy MICOM update file to CD/DVD/USB.
2. File name is “micom.ssp”, “update.ver”.
3. DVD Model: Osd shows update screen. You have to make sure your update file is most recently version.
Then press “ENTER” to proceed.
CD Model: VFD shows “reading”. And “update” shows up and blinking. Wait until MAIN set automatically power
off.
 MPEG Update
1. Copy MPEG update file to CD/DVD/USB.
2. File name is “DGTCXXXW.bin”
3. DVD Model: Osd shows update screen. You have to make sure your update file is most recently version.
Then press “ENTER” to proceed.
CD Model: VFD shows “reading”. And “update” shows up and blinking. Wait until MAIN set automatically power
off.