GB
8
You can check and change your selection of tracks at any time.
You must have selected at least one track.
1 Press STOP ( ) once if you have started listening to the
selection.
2 Press Program/Set.
Each time you press Program/Set, the next selection is
displayed.
3 Press Program/Set one or more times until the track to be
changed is displayed.
4 Press SKIP or to select the new track.
5 Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1 Switch the system on by pressing On/Standby.
2 Select the TUNER function by pressing TUNER/Band on the
front panel.
3 Select the required frequency band by pressing TUNER/Band
again on the front panel or Tuner/Band on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW Long Wave
4 To search for a Press Tuning Mode button
station... on the front panel....
Manually
One or more times until MANUAL is displayed.
Automatically
One or more times until AUTO is displayed
.
5 Select the station to be stored by:
Pressing Tuning Mode or on the front panel
or
Pressing Tuning Mode or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Tuning Mode or buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
Checking and Changing Programmed Tracks
To Next Page
Loading...
