ENGLISH
15
Motion Detect Sensor
Press the Away/MDS button to use the motion detection function.
Outdoor Air Intake
When a Wired Remote Controller is connected to the MINI AHU indoor unit, you can use Air Intake function for the MINI
AHU indoor unit.
When the air conditioner is on, press the OA Intake button to select the outdoor air intake function.
Automatically turn o the power when there is nobody in the room.
X
will be displayed and the motion detection function will begin
operation.
X
will be displayed and the function will begin operation.
Press the Away/MDS button one more time.Cancel
Press the OA Intake button one more time.Cancel
• The Away function is applicable only for the duct inverter
model with Away function.
• If an indoor unit does not support MDS or AWAY operation,
but you press the Away/MDS button, the
lamp will be
displayed.
• If the indoor unit is o or the outdoor air intake function is not
supported, and you have pressed the OA Intake button, then
the
lamp will appear.
When the wired remote controller is connected with a duct
X
will be displayed and AWAY operation will operate.
* Away
Automatically turns o the power after running the energy saving operation for
a certain amount of time.
uhzh~GyGjt~yT~lXWulupiWZ^ZYhTW\UGGGX\ YWX\TW[TXWGGG㝘䟸GZaYZa\_
To Next Page
Loading...
Need help?
General
