To Next PageTo Next PageWhat to do if Samsung MWR-WG00KN tracking is not complete?
If the tracking between the Wired Samsung Remote Controller and indoor units / ventilators (ERV) is incomplete for more than 5 minutes, a reset is required. Check the number of installed indoor units and ventilators (ERV) before resetting.
How to fix no communication between Samsung Master and Slave Remote Controllers?
If no communication occurs between the Master (Main) and Slave (Sub) Wired Samsung Remote Controllers, a reset is required. Ensure you check the number of installed indoor units and ventilators (ERV) before performing the reset.
What to do if Samsung Remote Control shows more than 16 indoor units installed?
If more than 16 indoor units and ventilators (ERV) are installed, a reset is required. Check the number of installed units and ventilators (ERV) before resetting your Samsung Remote Control.
General| Brand | Samsung |
|---|---|
| Model | MWR-WG00KN |
| Category | Remote Control |
| Language | English |
Hazards or unsafe practices resulting in severe personal injury or death.
Hazards or unsafe practices resulting in minor personal injury or property damage.
Warnings and cautions specific to the installation of the appliance.
Warnings regarding the power cord and electrical safety during operation.
Safety precautions for operating the air conditioner, including malfunction handling.
Warnings about safe cleaning procedures and materials to avoid.
Explains how to adjust the temperature in different operating modes.
Details selecting fan speeds like Auto, Turbo, High, Medium, and Low.
Explains how to control the air flow direction for general and specific models.
Instructions for using the Cool mode for optimal cooling in hot weather.
Details the Wind-Free function for mild cooling and its operation settings.
Instructions for using the Heat mode to stay warm in cold weather.
Reduces power consumption by optimizing ventilation based on temperature.
