|
12 English
Connections
Connecting External Components
Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the MINI COMPACT rear panel to the Audio Out of the external analog
component.
` Be sure to match connector colors.
2. Press the TUNER/AUX button to select AUX input.
You can select AUX by pressing the FUNCTION button on the remote control.
| NOTE |
\
When the unit is in AUX mode, if none of the buttons on the front panel are pushed for more than 8
hours, the power will automatically turn off.
Audio Cable (not supplied)
If the external analog
component has only
one Audio Out, connect
either left or right.
MX-F630DB-F730DB-ENG-0207.indd 12 2013-3-13 16:05:14
To Next Page
Loading...
