Do you have a question about the Samsung MXD-U000XN and is the answer not in the manual?
Brand | Samsung |
---|---|
Model | MXD-U000XN |
Category | Air Conditioner |
Language | English |
Procedures for diagnosing system issues using test operation and check modes.
Guidance on identifying and resolving specific error codes and operational problems.
Initial diagnosis and troubleshooting steps when the outdoor unit does not power on.
Troubleshooting steps for communication errors between outdoor unit INV and MAIN MICOM.
Troubleshooting steps for outdoor sensor errors like E221, E231, E251, and E320.
Troubleshooting steps for high pressure sensor errors, including open/short conditions.
Troubleshooting steps for suction temperature sensor errors, including open/short conditions.
Troubleshooting steps for compressor freezing control errors, specifically E403.
Troubleshooting steps for compressor down due to high pressure protection control, E407.
Troubleshooting steps for compressor down due to low pressure sensor protection, E410.
Troubleshooting steps for compressor down due to discharge temperature protection control, E416.
Troubleshooting for heating operation restrictions due to high outdoor temperatures, E440.
Troubleshooting steps for outdoor unit fan errors, including E458 and E475.
Troubleshooting steps for compressor errors, including E461 and E467.
Continuation of troubleshooting steps for compressor errors E461 and E467.
Troubleshooting steps for current errors, including E462 and E484.
Troubleshooting steps for overload protection errors, specifically E463.
Troubleshooting steps for IPM (Over Current) errors, specifically E464.
Continuation of troubleshooting steps for IPM (Over Current) error E464.
Troubleshooting steps for compressor overload errors, specifically E465.
Troubleshooting steps for system stop due to overload protection control, specifically E404.
Troubleshooting for cooling operation restrictions due to low outdoor temperatures, E441.