Samsung NE63 Series User Manual (English)

Questions and Answers:

A
Allison ClarkSep 13, 2025
How to level a Samsung NE63 Ranges?
- M
  Mary HernandezSep 13, 2025
  If your Samsung Range is not level, it may be due to improper installation. Place the oven rack in the center of the oven and put a level on the oven rack. Adjust the leveling legs at the base of the range until the oven rack is level. Ensure the floor is level, strong, and stable enough to support the range. If the floor is sagging or sloping, contact a carpenter to correct the situation. Also, make sure the kitchen cabinets are properly aligned and provide sufficient room for installation.
R
Ryan IbarraAug 29, 2025
Why Samsung Ranges surface units will not maintain a rolling boil or cook fast enough?
- D
  Deborah CollinsAug 29, 2025
  There are a couple of reasons why the surface units on your Samsung Ranges might not maintain a rolling boil or cook fast enough: * You may be using inappropriate cookware. Use pans that are flat and match the diameter of the surface unit selected. * In some areas, the power (voltage) may be low. Cover the pan with a lid until the desired heat is obtained.
D
Dawn JohnsonAug 25, 2025
What to do if my Samsung NE63 Ranges oven will not turn on?
- E
  Emma JacksonAug 25, 2025
  If your Samsung Ranges oven isn't turning on, first ensure the range is fully plugged into a properly grounded electrical outlet. Check your home's fuse or circuit breaker and replace the fuse or reset the breaker if necessary. Also, verify that the oven controls are correctly set. If the oven is too hot, allow it to cool down. For incomplete service wiring, call for service. In case of a power outage, check if house lights turn on; if not, contact your local electric company.
S
Scott FlemingAug 25, 2025
What to do if my Samsung Ranges appliance will not turn on?
- O
  ostoneAug 26, 2025
  If your Samsung Ranges appliance isn't turning on, make sure the power cord is plugged into a live, properly grounded outlet. Check the fuse and circuit breakers. For incomplete service wiring, call for service. In case of a power outage, check if the house lights turn on; if necessary, call your local electric company.
L
lparkerAug 26, 2025
Why Samsung Ranges surface units will not turn on?
- D
  Damon GuzmanAug 26, 2025
  If the surface units on your Samsung Ranges won't turn on, there are a few potential reasons: * A fuse in your home may be blown, or a circuit breaker may have tripped. Replace the fuse or reset the circuit breaker. * The cooktop controls might be set improperly. Check if the correct control is set for the surface unit you are using. * Food spillover was not cleaned. Refer to the section on the care and cleaning of the glass cooktop on page 52.
H
Haley OlsonAug 26, 2025
What to do if my Samsung NE63 displays a 'bAd LinE' error?
- J
  joannrivasAug 26, 2025
  If the power connection is plugged in improperly, the message “bAd LinE” will appear on the display of your Samsung Range. To resolve this, ensure you reconnect the power connection properly. This should make the message disappear.
W
William PatelAug 27, 2025
Why my Samsung NE63 Ranges oven will not turn on?
- T
  Timothy LoveAug 27, 2025
  If your Samsung Range oven will not turn on, there are several potential causes: * The range may not be completely plugged into the electrical outlet. Ensure the electrical plug is correctly inserted into a properly grounded outlet. * A fuse in your home may be blown, or a circuit breaker may have tripped. Replace the fuse or reset the circuit breaker. * The oven may be too hot. Allow the oven to cool down. * Power outage. Check to see if the house lights will turn on. If necessary, call your local electric company for service.
C
Christopher ClarkAug 27, 2025
How to fix a blank display on Samsung NE63 Ranges?
- E
  Elizabeth BlairAug 27, 2025
  If the display on your Samsung Ranges goes blank, it's possible that a fuse in your home has blown or the circuit breaker has tripped. Replace the fuse or reset the circuit breaker to resolve this.
T
Tracy SpencerAug 27, 2025
Why won't my Samsung Ranges surface units maintain a rolling boil?
- R
  Roy BurkeAug 27, 2025
  If the surface units on your Samsung Ranges aren't maintaining a rolling boil or cooking fast enough, ensure you're using appropriate cookware. Use pans that are flat and match the diameter of the surface unit selected. If the power voltage is low in your area, cover the pan with a lid until the desired heat is achieved.
J
Janet YoderAug 28, 2025
Why is the display flashing on my Samsung NE63 Ranges?
- J
  Jason MoralesAug 28, 2025
  If the display on your Samsung Ranges flashes, it indicates there was a power failure. Reset the clock to resolve this issue.