Samsung Network Printer - Printing in Netware; Adding a Queue; Adding a Printer

NetWare environment
4. 2
NOTE : Use NDS Setup if your network uses NetWare 4.x/5.x/
6.x in native mode. Use Bindery Setup if your network uses
NetWare 3.X or uses NetWare 4.x/5.x/6.x in bindery emulation
mode.
Printing in NetWare
To print to your network printer on a NetWare workstation, you
need to add a print queue.
NOTE : To use bindery emulation, you must log on to a Bindery
server as an administrator. In the NDS mode, log on to target
text of the NDS tree where you have administrator privileges.
Adding a queue
1 Open the NWADMIN dialogue box by double clicking on the
NetWare Client.
2 Right-click CONTEXT , then choose the create menu.
3 You will need to create all of the following items:
• Printer Server: represents a network print server.
• Printer: represents a network printing device.
• Printer Queue: represents a network print queue.
NOTE : The New Object dialogue box lets you choose the class
of object to create.
4 Double-click each tree print object and select
Assignments menu .
5 Click Add .
The print server object which was created in Step 3 has a
link assigned to the printer object and the printer object a
link to the print queue object.
Adding a printer
1 Select Add Printer from the Printer and fax menu in the
control panel.
2 Select Network Printer and click Next .
3 Select Novell Directory Service , and then click the
context tree and an existing printer object name.
4 Click Next .
5 If the server does not provide the printer driver or there is
no one available on the network, a dialogue box appears
to allow users to select a printer driver. Select the driver
and click
Next .
6 Install the printer driver by following the onscreen
instructions.