104 Users Manual
For X25 / X50 models, the configuration needs to be changed as follows after
connecting the cable.
1. Click Start > Control Panel > Appearance and Themes > Display
2. Click the Settings tab > Advanced
3. Click the Display tab.
4. Select YPbPr On/Off.
5. Click Apply.
6. Click YPbPr.
7. Select the appropriate TV type in the YPbPr Properties window and Click
Apply.
2. Press the <Fn>+<F4/ > keys. Provided that an external display device is
connected, the display option changes in LCD > CRT > LCD+CRT order
whenever the <Fn>+<F4/ > keys are pressed.
Provided that multiple external display devices are connected, the display
order is LCD > CRT > TV > LCD+CRT > LCD+TV > LCD whenever the
<Fn>+<F4 / > keys are pressed.
In the DOS environment, the screen is output to LCD and CRT in this
sequence. The TV function is not supported. In full screen DOS mode of
Windows, you cannot use the hot keys.
YPbPr On/Off
YPbPr
To Next Page
Loading...
