36 Users Manual
Using the PCMCIA Card Slot
Various different functions can be added by inserting PCMCIA cards into the system.
This system supports 16/32 bit, type I or II PCMCIA card types.
The PCMCIA card slot does not support a ZV card or a PCMCIA III card.
To insert a PCMCIA card
Before using the PCMCIA slot, remove the slot protector.
Push the eject button of the PCMCIA card slot once to pop it out. Push the
button again to eject the slot protector.
1. Insert a PCMCIA card into the PCMCIA card slot on the side of the computer.
Ensure that the PCMCIA card is inserted the correct way, as incorrect insertion
will damage the PCMCIA card slot.
2. Windows automatically installs the necessary driver for the card. If there is no
available driver found by Windows, you have to install the driver using a disk
supplied with the card.
Eject Button
To Next Page
Loading...
