time, the system rings you back, so that you do not
forget about the call. If you do not answer the call,
it is automatically recalled to the operator group.
(Operator group is station group numbered
500
)
To Place an Intercom Call on
Exclusive hold
Keyphone
1. When connected to a station, press
[HOLD]
once.
¡¤
The station's
[DSS]
button will blink green
on your keyset, and show a steady red
light on other keysets.
2. After placing a call on hold, you can answer
or make another call.
3. To retrieve the held station call, press the
blinking
[DSS]
button.
Intercom calls will always be placed on exclusive hold.
This feature allows you to transfer a call to another
station or group. Any outside or intercom call may
be transferred, regardless of whether you initiated or
received the call.
When you transfer a call, you may wait on the line
and announce the call, or you may hang up when
you hear the ringback tone. The connection between
the caller and the person to whom the call is being
CALL PROCESSING
19
Transferring Calls
¡îNOTE
To Next Page
Loading...
