4. Dial the telephone number and hookflash.
5. Replace the handset.
You may manually dial additional digits following a
Speed-Dial number, or chain together as many
speed-dial locations as required.
Keyphone
After the first speed-dial number is dialed, press
[ALM/SD]
again and enter another Speed-Dial location,
or manually enter additional digits following the
speed-dial number.
Standard phone
After the first Speed-Dial number is dialed, manually
dial the additional digits.
When dialing an outside number, press [
PSE
] to insert a
preprogrammed pause time, if
[PSE]
has been pre-
programmed.
DIALING FEATURES
33
Chain Dialing
Pause in Normal Dial
To Next Page
Loading...
