Samsung NX-828 - Calling Other Stations; Calling the Operator Group

1. Lift the handset, and dial the desired station
number.
Or, press the desired station's [DSS] button, with
the handset on-hook.
¡¤
The speakerphone activates automatically
and your phone starts dialing.
¡¤
To program a station number into the [
DSS
]
button, refer to the
Technical Manual
.
2. When the other party answers, either speak
into the handset or talk using speakerphone.
3. To end the call, replace the handset or press
[SPEAKER], if using the speakerphone.
To answer a ringing line, or place a call to
another intercom station, while talking with one
intercom station, press the [DSS] button for the
second station without hanging up. The original
station line is automatically disconnected and the
second station will ring. This feature is not available
on standard phones.
Lift the handset or press [SPEAKER].
Dial [0] to call your system operator group.
You can call the operator group by dialing the
Operator group number. The Operator group is the
station group numbered 500.
INTERCOM CALLING
4
Calling Other Stations
Calling the Operator
Group
3NOTE
3NOTE