Samsung NX-828 - Station Group Calls; Answer Mode Change

Lift the handset or press [SPEAKER], and dial the
station group number.
Or, press the [SGR] button of the desired station
group.
You can set your phone to Auto-Answer or
Voice-Announce mode.
To Set Auto-Answer Mode
1. With the handset on-hook, press [AUTO RDL]
and dial [1][0] to enter program mode.
2. Press [2] to set Auto-Answer Mode.
3. Press [AUTO RDL] to save and exit.
To Set Voice-Announce Mode
1. With the handset on-hook, press [AUTO RDL]
and dial [1][0] to enter program mode.
2. Press [3] to set Voice-Announce Mode.
3. Press [AUTO RDL] to save and exit.
Auto-Answer mode can be changed by a caller by
pressing [TRANSFER] and dialing [1][4].
Or, pressing the [FAT] button.
On a single-line telephone, hook flash and dial
[1][4].
5
INTERCOM CALLING
Station Group Calls
Answer Mode Change
/
/
3NOTE