133
Wireless network > Using a smart phone as a remote shutter release
5
On the camera, allow the smart phone to connect to your
camera.
If the smart phone has been connected to your camera before, it is
connected automatically.
6
On the smart phone, set the following shooting options.
Icon Description
Flash option
Timer option
Photo size
Saving location
While using this feature, some buttons are not available on your
camera.
The zoom button and the shutter button on your smart phone will
not function when using this feature.
Remote Viewnder mode supports the and photo sizes only.
7
On the smart phone, touch and hold to focus.
The focus is automatically set to Multi AF.
8
Release to capture the photo.
Photos saved to the smart phone will be resized to 1616X1080
when shooting in
and to 1920X1080 when shooting in
resolution.
When you use this feature, the ideal distance between the camera and the
smart phone may vary, depending on your surroundings.
The smart phone must be within 7 m of the camera to use this feature.
It will take some time to capture the photo after you release on the smart
phone.
The Remote Viewnder function will deactivate when:
-
there is an incoming call on the smart phone
-
either the camera or the smart phone turns o
-
the memory is full
-
device loses its connection to the WLAN
-
the Wi-Fi connection is poor or unstable
-
you perform no operations for approximately 5 minutes while connected
To Next Page
Loading...
