My Camera > Shooting modes
64
Using Z
The Z allows you to zoom in on a subject with less degradation of
photo quality than the Digital zoom. However, the photo resolution may
change compared to when you zoom in by rotating the zoom ring.
1
Rotate the mode dial to P, A, S, M, or i.
2
Press [i-Function] on the lens to select Z.
You can also press [i-Function], and then press [C/F] or drag the
screen to select Z.
3
Adjust the focus ring to select a zoom ratio.
You can also scroll the jog dial or drag the screen to select an
option.
Photo resolution varies according to the zoom ratio if you use the
Z.
3:2 16:9 1:1
x1.2
4560X3040 (13.9M) 4560X2568 (11.7M) 3040X3040 (9.2M)
x1.4
3888X2592 (10.1M) 3888X2184 (8.5M) 2592X2592 (6.7M)
x1.7
3264X2176 (7.1M) 3264X1840 (6.0M) 2176X2176 (4.7M)
x2
2736X1824 (5.0M) 2736X1536 (4.2M) 1824X1824 (3.3M)
These gures are based on the maximum resolution at each image ratio.
4
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
Z is not available when you capture burst shots.
Z is not available when you capture photos in the RAW le format.
Z is deactivated when you record videos by pressing the video
recording button.
This function is not available when you set 3D Auto Mode in 3D mode.
To Next Page
Loading...
