137
Wireless network > Sending photos or videos via email
Setting an email password
1
Rotate the mode dial to B.
2
Select .
The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 124)
3
Press [m].
4
Select Setting Password
ĺ
On.
To deactivate the password, select O.
5
When the pop-up appears, select OK.
6
Enter a 4-digit password.
7
Enter the password again.
8
When the pop-up appears, select OK.
If you lost your password, you can reset it by selecting RESET on the password
setting screen. When you reset the information, the previously saved user’s
setting information, email address, and recently sent email list will be deleted.
To Next Page
Loading...
