Samsung NX60BB851112 - User Manual

Questions and Answers

T
Todd BassAug 11, 2025
What to do if I smell gas from my Samsung Oven?
- C
  Christopher WhiteAug 11, 2025
  If you smell gas, it could be due to a few reasons. First, ensure that all surface burner knobs are in the OFF position. If a burner knob isn't completely off, gas may be released. If all knobs are off and you still smell gas, there may be a gas leak. In this case, immediately evacuate the area and call your gas supplier from a neighbor's phone. Do not use your own phone as it could create a spark. Follow the gas supplier's instructions. If you cannot reach them, contact the fire department.
B
barbara01Aug 17, 2025
What to do if I smell gas coming from my Samsung Ranges?
- R
  Richard FlowersAug 18, 2025
  If you smell gas, immediately clear the area of all people. Then, use a neighbor's phone to call your gas supplier. Follow their instructions carefully. If you cannot reach them, call the fire department. Avoid using your own phone, as it could create a spark.
G
Gregory BoltonAug 25, 2025
Why won't the surface burners light on my Samsung Ranges?
- C
  Clifford StewartAug 25, 2025
  If the surface burners on your Samsung Ranges won't light, first, make sure the control knob is properly set by pushing it in and turning it to the 'Lite' position. Also, ensure that the burner caps are correctly placed and the burner base is aligned. Clean the electrodes, put the burner cap on the burner head and align the burner base.
L
Lisa RodriguezAug 29, 2025
What to do if all burners do not light on my Samsung NX60BB851112 Ranges?
- A
  amy38Aug 29, 2025
  If all burners on your Samsung Ranges fail to light, check that the power cord is securely plugged into a properly grounded electrical outlet. Also, inspect your home's fuse box or circuit breaker panel and replace any blown fuses or reset tripped breakers. The gas supply should be properly connected and turned on according to the Installation Instructions that came with your range.
C
Caitlin AllenSep 4, 2025
Why does the surface burner click during operation on my Samsung NX60BB851112 Ranges?
- M
  moralesnicoleSep 5, 2025
  If the surface burner on your Samsung Ranges clicks during operation, it might be because the control knob is left in the 'Lite' position. After the burner lights, turn the control knob to your desired setting. If the clicking continues, contact a service technician.