Why do the speakers on my Samsung Plasma TV make an inappropriate noise?
Check the cable connections, ensuring a video cable is not connected to an audio input. For aerial or cable connections, check the signal strength; low signal level may cause sound distortion.
What to do if my Samsung Plasma TV has no picture or video?
First, check all cable connections by removing and reconnecting them to both the TV and any external devices. Next, ensure that your external device's video outputs (like a Cable/Set Top Box, DVD, or Blu-ray player) match the connections to the TV input. For example, if the device uses HDMI, connect it to an HDMI input on the TV. Also, confirm that all connected devices are powered on. Finally, select the correct source on your TV using the SOURCE button on the remote control and try rebooting the connected device by reconnecting its power cable.
What to do if my Samsung Plasma TV turns off automatically?
Ensure the Sleep Timer is set to Off in the Time menu. If your PC is connected to the TV, check your PC power settings. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
What to do if my Samsung PE43H4500 will not turn on?
First, ensure the AC power cord is securely plugged into both the wall outlet and the TV. Then, verify that the wall outlet is working. Finally, try pressing the POWER button on the TV itself to rule out a remote control issue. If the TV turns on this way, the problem lies with the remote.
What causes intermittent loss of audio or video on my Samsung Plasma TV?
Check the cable connections and reconnect them. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
Why are my Samsung PE43H4500 settings lost after 30 minutes?
If the TV is in Store Demo mode, it resets audio and picture settings every 30 minutes. To change from Store Demo to Home Use, press the SOURCE button to select TV mode, then go to MENU - Support - Use Mode.
Why is my Samsung Plasma TV making a humming noise?
Plasma TVs typically make a soft humming sound, which is normal due to the electrical charges used to create images. If the humming is loud, try lowering the brightness. Ensure the back of the TV isn't too close to a wall or hard surface, and reroute connection cables. Improper wall mount installation can also cause excessive noise.
How to fix Samsung Plasma TV image retention (burn-in)?
To minimize screen burn, this unit is equipped with Pixel Shift technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.
What to do if there is a dotted line on the edge of my Samsung Plasma TV screen?
If the picture size is set to Screen Fit, change it to 16:9. Change cable/satellite box resolution.
What to do if my Samsung Plasma TV has a good picture but no sound?
Set the Speaker Select option to TV Speaker in the sound menu. If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). Reboot the connected device by reconnecting the device’s power cable.
Guidance on initial TV setup, reset options, and PIN management.
Methods for changing input sources, editing names, and viewing device information.
Solutions for issues like poor image quality, distortion, and incorrect colors.
Troubleshooting steps for no sound, low volume, or sound distortion.
Addresses problems like no picture, TV not turning on, or automatic power off.
Resolves issues with remote control malfunction, unsupported modes, and intermittent audio/video.
Solutions for full-screen display problems, picture distortion, and macroblocks.
Fixes for lost settings, scrambled signals, and unavailable features like PIP.
Fixes for aerial connection issues and humming noises from the TV.
General| Screen Size | 43 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60Hz |
| Aspect Ratio | 16:9 |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Resolution | 1920 x 1080 pixels |
To Next Page