A
Ann SmithSep 16, 2025
How to remove a dotted line on the edge of my Samsung PE43H4500 TV screen?
- SstephenfriedmanSep 16, 2025
If the picture size is set to Screen Fit, change it to 16:9. Also, try changing the cable/satellite box resolution.
To Next PageTo Next PageHow to remove a dotted line on the edge of my Samsung PE43H4500 TV screen?
If the picture size is set to Screen Fit, change it to 16:9. Also, try changing the cable/satellite box resolution.
How to program my cable box remote to control my Samsung TV?
Programme the cable/set-top box remote control to operate the TV. Refer to the cable/set-top box user manual for the SAMSUNG TV code.
What to do if my Samsung TV is tilted to the right or left side?
Remove the stand base from the TV and reassemble it.
Why is there a plastic smell coming from my new Samsung TV?
This smell is normal and will dissipate over time.
What to do if I have difficulties assembling the stand base on my Samsung TV?
Make sure the TV is placed on a flat surface. If you cannot remove the screws from the TV, use a magnetized screwdriver.
Why is the TV Signal Information unavailable in the Self Diagnosis Test menu on my Samsung PE43H4500?
This function is only available with digital channels from an Aerial / RF / Coax connection.
Why are my Samsung PE43H4500 settings lost after 30 minutes?
If the TV is in Store Demo mode, it resets audio and picture settings every 30 minutes. To change from Store Demo to Home Use, press the SOURCE button to select TV mode, then go to MENU - Support - Use Mode.
What to do if my Samsung Plasma TV has a good picture but no sound?
Set the Speaker Select option to TV Speaker in the sound menu. If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). Reboot the connected device by reconnecting the device’s power cable.
What to do if my Samsung Plasma TV has no picture or video?
First, check all cable connections by removing and reconnecting them to both the TV and any external devices. Next, ensure that your external device's video outputs (like a Cable/Set Top Box, DVD, or Blu-ray player) match the connections to the TV input. For example, if the device uses HDMI, connect it to an HDMI input on the TV. Also, confirm that all connected devices are powered on. Finally, select the correct source on your TV using the SOURCE button on the remote control and try rebooting the connected device by reconnecting its power cable.
What to do if my Samsung Plasma TV turns off automatically?
Ensure the Sleep Timer is set to Off in the Time menu. If your PC is connected to the TV, check your PC power settings. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
General| Screen Size | 43 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60Hz |
| Aspect Ratio | 16:9 |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Resolution | 1920 x 1080 pixels |
Guidance on initial TV setup, reset options, and PIN management.
Methods for changing input sources, editing names, and viewing device information.
Solutions for issues like poor image quality, distortion, and incorrect colors.
Troubleshooting steps for no sound, low volume, or sound distortion.
Addresses problems like no picture, TV not turning on, or automatic power off.
Resolves issues with remote control malfunction, unsupported modes, and intermittent audio/video.
Solutions for full-screen display problems, picture distortion, and macroblocks.
Fixes for lost settings, scrambled signals, and unavailable features like PIP.
Fixes for aerial connection issues and humming noises from the TV.
