Playback/Editing
78
Transferring files to your computer (for Windows)
Turn on the camera.
5
The computer recognizes the camera automatically.•
If you set the USB option to Select Mode, select Computer from the
pop-up window.
Select a folder on your computer to save new files.
6
If your camera has no new files, the pop-up window for saving •
new files will not appear.
Select
7
Yes.
New files will be transferred to the computer.•
For Windows Vista, select Run iStudio.exe from the AutoPlay window.
Transferring files using Intelli-studio
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
The battery will be charged while the camera is connected to a computer with
the USB cable.
In Shooting or Playback mode, press [
1
m
].
Select
2
Settings → PC Software → On.
Turn off the camera.
3
Connect the camera to your computer with the USB
4
cable.
You must plug the end of the cable with the indicator light (▲) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
To Next Page
Loading...
