Extended functions
34
Shooting modes
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
Before correction After correction
1
In Shooting mode, press [ ].
2
Select DUAL IS.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to take the photo.
• The digital zoom does not work in this mode.
• The camera corrects the photo optically only if the light source is
brighter than fluorescent light.
• If your subject is moving rapidly, the photo may be blurry.
• Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 25)
Using the Night mode
Use the Night mode to take a photo with options for preset for
shooting at night. Use a tripod to prevent your camera from
shaking.
1
In Shooting mode, press [ ].
2
Select Scene → Night.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to take the photo.
Adjusting the exposure in the Night mode
In Night mode, you can use a slow shutter speed to extend
the time until the shutter closes. Increase the aperture value to
prevent overexposure.
1
In Shooting mode, press [ ].
2
Select Scene → Night.
3
Press [ ].
4
Select Shooting → Long Time Shutter.
To Next Page
Loading...
