Samsung pl43d450 - Connecting Audio and PC Devices

10
English
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
✎ DIGITAL AUDIO OUT (OPTICAL)
x
When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is availablewhen you connect the TV to an external device supporting 5.1 CH.
x
When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD
home theater. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hearf 2 CH audio from
the amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from
your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX-LINK: Connector for service only.
OPTICAL
Amplifier / DVD home theater
Digital Audio System
Optical Cable (Not Supplied)
[PD450-ZX]BN68-03325C-00L02.indb 10 2011-01-13 오전 10:39:25