Basic Features
16
English
Picture Options
O
MENU
m
→ Picture → Picture Options → ENTER
E
Picture Options
Color Tone Standard
Digital Noise Filter Auto
MPEG Noise Filter Auto
HDMI Black Level Low
Film Mode Off
■ Color Tone (Cool / Standard / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When the INFO button is pressed, the signal
strength bar is displayed.
✎
When bar is green, you are receiving the best
possible signal.
■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■ HDMI Black Level (Low / Normal): Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
Available in TV, AV, Component (480i / 1080i) and
HDMI (1080i).
✎
If the screen does not seem natural, change its
option to Off / Auto1 / Auto2 in Film Mode.
Reset Picture (Yes / No)
Resets your current picture mode to its default settings.
[PE400-ZD]BN68-04363B.indb 16 2012-03-27 �� 4:18:26
To Next Page
Loading...
