1. Firmware
Upgrading Firmware
Full Firmware
How to do Full Ver F/W upgrading
Firmware File Construction :
- Code Area : Being Included Operation codes for camera driving.
- Partition[1:3] : Being Included all kind of resources for camera driving.
=> Defective Pixel & Lens shading adjustment data goes to save in Partition3.
- User Area : Being saved all setting data while customer played their camera function,
and other adjustment data, also.
▷[Reference] Full F/W
- Upgrading the general firmware means that real action is occurred on "Code" area + "Partition[1:2]" .
- Do not change what saved on "User Area" & "Partition3"
To Next Page
Loading...
