1. Firmware
▷[Reference] Full F/W
- Upgrading Full Firmware means that real action is occurred on "Code" area + "Partition[1:3]"
- Some adjustment data saved on "User Area" will not be changed.
- Defective Pixel & Lens Shading adjustment data have to be reset,
cause those files are saved on Partition3. Do not forget to re-adjust or do the back-up process for
adjustments so that previous adjustment files are restored.
- While done the FULL F/W upgrading, adjustment files will be saved into the external memory card,
automatically. Then, do uploading those adjustment files according to below steps. (No.1 ~ No.7)
- Automatically saved files into the external memory card
: LSCLUT0.BIN, DefectivePixel0.bin, DefectivePixel1.bin (3 types)
To Next Page
Loading...
