14
Chapter 2. Device setup
Plug In Module (Sold separately)
• The colour and shape of parts may differ from what is shown. Specications are
subject to change without notice to improve quality.
• PM43F-P/PM49F-P/PM55F-P models are only supported.
PIM slot
To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible
with Open Pluggable Specication (OPS) standards.
• For details on how to connect a device, refer to the user manual provided with the
PIM upon purchase.
• To obtain optimum audio quality, congure the HDMI audio settings using
the Windows Control Panel on the OPS device. For products made by other
manufacturers, this only applies to HDMI compatible devices.
• To enable sound output from the product with an OPS device that does not support
HDMI, congure the analogue audio settings using the Windows Control Panel, go to
Plug In Module > Edit Name and set the input source to PC, DVI PC or DVI.
To Next Page
Loading...
