Samsung PM49F

37
Chapter 3. PC software (Multiple Display Control)
PC software (Multiple Display Control)
Multiple display control “MDC” is an application that allows you to easily control
multiple display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the
programme. The MDC programme is available on the website.
Installation/uninstallation
Installation
• MDC installation can be affected by the graphics card, mother board and network
conditions.
1 Click the MDC Unied installation programme.
2 Select a language for installation. Next, click “OK”.
3 When the “Welcome to the InstallShield Wizard for MDC_Unied” screen appears,
click “Next”.
4 In the “License Agreement” window displayed, select “I accept the terms in the
license agreement” and click “Next”.
5 In the displayed “Customer Information” window, ll out all the information elds
and click “Next”.
6 In the displayed “Destination Folder” window, select the directory path you want to
install the programme in and click “Next”.
‒ If the directory path is not specied, the programme will be installed in the
default directory path.
7 In the displayed “Ready to Install the Program” window, check the directory path to
install the programme in and click “Install”.
8 Installation progress will be displayed.
9 Click “Finish” in the displayed “InstallShield Wizard Complete” window.
‒ Select “Launch MDC Unied” and click “Finish” to run the MDC programme
immediately.
10 The MDC Unied shortcut icon will be created on the desktop after installation.
‒ The MDC execution icon may not be displayed depending on the PC system or
product specications.
‒ Press F5 if the execution icon is not displayed.
Uninstallation
1 Go to Control Panel.
2 Under Programs, click Uninstall a program.
3 Select MDC Unied from the list.
4 Click Uninstall/Change.
Path and name of the menu may differ depending on the operating system.