Disassembly & Reassembly
3-2 Samsung Electronics
3-1-3 Separation of FILTER-EMI AC LINE
Part Name Description Description Photo
FILTER-
EMI
AC LINE
① Detach connector from SMPS.
② Remove 1 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
③ Remove 2 screw. ( )
: PH,+,WWP,M3,L8,NI PLT
④ Remove 1 screws.( )
: BH,+,S,M4,L10,ZPC(BLK)
⑤ Separate FILTER-EMI AC LINE from
bracket.
3-1-4 Separation of BRACKET-PCB
Part Name Description Description Photo
Bracket
PCB
① Remove 2 screw.( )
: BH,+,B,M4,L3,ZPC(BLK)
② Remove 2 screw.( )
: BH,+,S,M4,L10,ZPC(BLK)
③ Remove the BRACKET-PCB.
3-1-2 Separation of ASSY PCB MISC-MAIN
Part Name Description Description Photo
Main
Board
① Detach all connectors from the Main
Board.
② Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
③ Remove the Main Board.
▶The photo is for 42".
50" is very similiar with 42".
To Next Page
Loading...
