7
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
전원
P
button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the l or r button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Selecting Store Demo
or Home Use
Press the l or r button, then press the ENTER
E
button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
메뉴
for 5 sec.
3
Selecting a channel
Press the l or r button, then press the ENTER
E
button.For more information, refer to
Channel → Auto Program (p. 13).
4
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y Manual: Allows you to manually set the current date and time. (p. 19).
5
View the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
6
Enjoy your TV.
Press the ENTER
E
button.
If You Want to Reset This Feature...
O
메뉴
m
→ Setup → Plug & Play → ENTER
E
ANT OUT
VHF/UHF Antenna
or
Cable
Power Input
Antenna Cable (Not Supplied)
[PC450-Kor]Web Manual-Eng.indd 7 2010-05-26 오후 5:37:18
To Next Page
Loading...
