◀ ◀▶
English
❑
Switching between Anynet+ Devices
1. 1. Press the 간편메뉴 button to select Anynet+ (HDMI-CEC).
2. The Anynet+ device connected to the TV will be displayed in the Device List
menu.
N
If you cannot find a device you want, press the
a
button to refresh the
list.
3. Select a device and press the 선택
E
button. You can switch to the selected
device.
N
The Device List menu will only appear when you set Anynet+ (HDMI-CEC)
to On in the System menu.
●
Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●
If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
To Next Page
Loading...
