Samsung PN43D450A2D - Troubleshooting for Anynet

◀ ◀▶
English
❑
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
•
CheckifthedeviceisanAnynet+device.TheAnynet+system
supportsAnynet+devicesonly.
•
Onlyonereceiver(hometheater)canbeconnected.
•
CheckiftheAnynet+devicepowercordisproperlyconnected.
•
ChecktheAnynet+device’sVideo/Audio/HDMIcableconnections.
•
Checkwhether
Anynet+ (HDMI-CEC)
issetto
On
intheAnynet+
setupmenu.
•
CheckwhethertheTVremotecontrolisinTVmode.
•
CheckwhethertheremotecontrolisAnynet+compatible.
•
Anynet+doesn’tworkincertainsituations.(Searchingchannels,
operating
My Contents
or
Plug & Play
(initialsetup),etc.)
•
WhenconnectingorremovingtheHDMIcable,pleasemakesureto
searchdevicesagainorturnyourTVoffandonagain.
•
CheckiftheAnynet+FunctionofAnynet+deviceisseton.