Samsung PN43D450A2D - Page 157

◀ ▶
English
I want to start Anynet+.
•
CheckiftheAnynet+deviceisproperlyconnectedtotheTVand
checkifthe
Anynet+ (HDMI-CEC)
issetto
On
intheAnynet+
Setupmenu.
•
Pressthe
간편메뉴
buttontodisplaytheAnynet+menuandselect
amenuyouwant.
I want to exit Anynet+.
•
Select
View TV
intheAnynet+menu.
•
Pressthe
TV/외부입력
buttonontheTVremotecontrolandselect
anon-Anynet+device.
The message
“Connecting to Anynet+
device...” appears on the
screen.
•
Youcannotusetheremotecontrolwhenyouareconfiguring
Anynet+orswitchingtoaviewmode.
•
UsetheremotecontrolaftertheTVhasfinishedAnynet+
configurationorhasfinishedswitchingtoAnynet+.
The Anynet+ device does
not play.
•
Youcannotusetheplayfunctionwhen
Plug & Play
(initialsetup)is
inprogress.