Samsung PN43D450A2D - Page 158

◀ ◀▶
English
The connected device is
not displayed.
•
CheckwhetherornotthedevicesupportsAnynet+functions.
•
CheckwhetherornottheHDMIcableisproperlyconnected.
•
Checkwhether
Anynet+ (HDMI-CEC)
issetto
On
intheAnynet+
setupmenu.
•
SearchAnynet+devicesagain.
•
YoucanconnectanAnynet+deviceusingtheHDMIcableonly.
SomeHDMIcablesmaynotsupportAnynet+functions.
•
Ifconnectionisterminatedbecausetherehasbeenapower
interruptionortheHDMIcablehasbeendisconnected,please
repeatthedevicescan.
The TV sound is not
output through the
receiver.
•
ConnecttheopticalcablebetweenTVandthereceiver.