◀ ▶
English
●
Auto Stereo
(Analog channels only)
If Auto Stereo is set to Auto, the audio is automatically switched to stereo or
mono according to the broadcast signal of the channel even if you change the
channel.
Auto: The audio is automatically switched to stereo or mono according to the
current broadcast signal.
Manual: The audio of the current channel is switched to mono. This setting is
applied to all channels in the same manner.
●
Multi-Track Sound
간편메뉴
T
(Analog channels only)
Depending on the particular program being broadcast, you can select to Multi-
Track Sound.
To Next Page
Loading...
