Samsung PN43D450A2D - Page 56

◀
◀
▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2. Select the IP Settings on network connection
screen.
3. Set IP Mode to Manual.
4. Press the
d
button on your remote to go to the
IP Address.
U
Move
E
Enter
R
Return
IP Settings
Internet Protocol Setup : Manual
►
IP Address . . .
Subnet Mask
. . .
Gateway
. . .
DNS : Manual
DNS Server
. . .
OK
● Thedisplayedimagemaydifferdependingon
themodel.