▶
English
●
Auto Protection Time (Off / 10 min. / 20 min. / 40 min. / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of burnt in ghost images
on the screen.
●
Scrolling: This function removes after-images on the screen by moving all
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
N
The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen. If
the after-image is not removed after performing the function, repeat the
function again.
N
Press any key on the remote control to cancel this feature.
●
Side Gray (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on
both extreme left and right sides.
To Next Page
Loading...
