◀ ▶
English
●
Position: Adjusts the picture position. Position is only available if Picture size
is set to Zoom1, Zoom2, Wide Fit, or Screen fit.
N
To use the Position function after selecting Zoom1, Zoom2 or Wide Fit,
follow these steps:
1. Select the Position, and then press the ENTER
E
button.
2. Select the Position button, and then press ENTER
E
.
3. Press the
▲
or
▼
button to move the picture up or down.
4. Press the ENTER
E
button.
N
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER
E
. The picture will be reset to
its default position.
To Next Page
Loading...
