◀ ▶
English
N
To use the Position function after selecting Screen Fit when connected
to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follow
these steps:
1. Select the Position, and then press the ENTER
E
button.
2. Select the Position button, and then press ENTER
E
.
3. Press the
▲, ▼, ◄
or
►
button to move the picture.
4. Press the ENTER
E
button.
N
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER
E
. The picture will be reset to
its default position.
To Next Page
Loading...
