®
Position: Adjusts the picture position, is only available if Picture
Size is set to Zoom10 Zoom2° Wide IFit,or Screen
[_ To use the Position function after selecting Zoom10 Zoom2 or Wide Fit,
follow these steps:
1. Select Position, and then press the ENTERE3_ button.
2. Select the Position button, and then press ENTERE3_.
3. Press the A/T buttons to move the picture up or down.
4. Press the ENTERIZ]_ button.
[_ If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTERE3_. The picture will be reset to
its default position.
English
To Next Page
Loading...
