%
%
To use the Position function after selecting Screen Fit when connected
to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follow
these steps:
1. Select Position, and then press the ENTERE34abutton.
2. Select the Position button, and then press ENTERE34a.
3. Press the A/T/4/I_ buttons to move the picture.
4. Press the ENTERE34abutton.
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTERE3_. The picture will be reset to
its default position.
English
To Next Page
Loading...
