Connecting Speakers
1 Remove the screws on the rear of the PDP Display.
2 Hang the two “T” shaped hangers
on the square holes on the rear of
the PDP Display.
3 Tighten the PDP Display and the speaker bracket using the screws removed from the PDP Display.
➢
When moving your PDP Display, do NOT hold the speaker connected to your PDP Display. It may
damage the bracket clamping the speaker and your PDP Display together and result in a drop of
your PDP Display and a risk of personal damage and injury.
Continued...
PPM42M7H PPM50M7H
PPM42M7H PPM50M7H
English - 13
➢
Speakers are optional. You have to purchase the speakers
additionally.
e
PPM42M7H
PPM50M7H
BN68-01304G_Eng 10/9/07 5:05 PM Page 13
To Next Page
Loading...
