Samsung PPM50M7H - Changing the Picture Standard

Y
co
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the … or † button to select Picture.
Result
: The Picture menu is displayed.
3 Press the ENTER () button.
Result
: The Mode is selected.
4 Press the ENTER () button again.
Result
: The Mode menu is displayed.
5 Press the ENTER () button.
Result
: The following options are available.
Dynamic - Standard - Movie - Custom
6 Select the required option by pressing the … or † button.
7 Press the ENTER () button.
8 Press the EXIT button to exit.
➢
You can also set these options simply by pressing the
P.MODE (Picture Mode) button on the remote
control.
Changing the Picture Standard
English - 16
Mode : Dynamic
Color Control
Size : 16:9
PIP
Picture
Move Enter Return
Mode
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
Reset
Mode
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
Reset
Dynamic
Standard
Movie
Custom
BN68-01304G_Eng 10/9/07 5:05 PM Page 16