30
Section 7: Messages
This section explains how to use your phone to exchange Text,
and Picture messages with compatible phones and devices.
Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the
QWERTY keyboard.
Note:
Available memory is shared between all messages. The number of
messages you can store and send is dependant on message length
and remaining memory.
Accessing the Messages Menu
䊳
In Standby mode, press Messages.
– or –
Press
Menu
➔ Messages.
The Messages menu displays on the screen.
Creating and Sending Text Messages
Text messages contain up to 160 characters.
1. In Standby mode, press
Menu
➔ Messages.
2. Select Send Message ➔ Text Message. The Create Txt
Msg screen displays.
3. Enter the phone number or e-mail address for the
recipient.
– or –
Press
Add
and select a contact from
Contacts
,
Groups
, or
the
Recent Calls
list.
4. Press or and compose your text message.
5. Press
Options
and select an option from the “Message
Content and Delivery Options” on page 38.
6. Press
SEND
( or ) to send this message.
Text Message Settings
1. In Standby mode, press
Menu
➔ Messages ➔
Msg
Settings
➔
Text Message
.
2. Select the desired option, then select the desired setting or
enter the desired value.
The following options are available:
•
Auto View
: On/Off. With Auto View
On
, the full content of a text
message displays on the screen when received.
•
Signature
: Create a signature, which can be included at the
bottom of outgoing message text.
r580.book Page 30 Thursday, October 28, 2010 12:45 PM
To Next Page
Loading...
